Net10 Phone Codes Crack
Choose monthly prepaid plan you want. Use promo code INSTANT30 to get 30% off total. Only one order allowed. I order two using different emails, hopefully the system not so smart to detect same shipping address. Got emails for both orders but cross finger no cancellation. I am using Net10 $40 8gb data, so $12 off the $40 monthly plan, after tax.
NET10 is a prepaid wireless carrier that allows users to use GSM (Global System for Mobile communications) phones with their prepaid plan. If you own a NET10 GSM phone, you can remove the network lock originally placed on the device by NET10 with an unlock code. Once the network lock is removed, you can use the device with any wireless carrier that activates GSM phones. You can obtain the unlock code for your device by contacting NET10.
Step 1
Dial '*#06#' from your NET10 GSM phone and wait for the IMEI (International Mobile Equipment Identifier) number to appear. Write this number down.
Step 2
Dial '611' from your mobile phone and follow the prompts to speak with a NET10 operator.
Step 3
Ask the representative to provide you with the unlock code for your device. Provide the representative with the IMEI number for your GSM phone. Wait for the representative to generate the code. Write the code down and disconnect the call.
Step 4
Turn off your GSM mobile phone and remove the battery. Locate the SIM card slot.
Step 5
Remove the existing SIM card from the slot. On some NET10 GSM phones, you may need to insert a SIM card from another carrier into the device. The SIM card does not have to be active.
Step 6
Reinsert the battery and snap the battery compartment door back on, then turn on your mobile phone.
Step 7
Disregard any message that may appear on your screen, unless it says to enter the 'Special' code.
Enter the unlock code into your device in the same manner that it was given to you by the operator. Wait for your device to notify you that the SIM restriction is off or reboot. These are both indications that the phone is unlocked.
Tip
- You can purchase an unlock code for your NET10 GSM phone from a cell phone unlocking company.
Warning
- Do not enter the wrong unlock code into your device repeatedly or it may lock your phone indefinitely.
Video of the Day
More Articles
Introduction
Once the phone is disassembled, you can access the motherboard, replace the screen, or keyboard, and/or find other faults with the phone.
No parts specified.
Frontal view and rear view of the LG Net10 prior to disassembling.
Remove battery back cover by applying pressure along the groove. The LG logo should be up right. Apply the pressure downwards to remove the cover.
Remove the battery from the top of the battery.
Remove the SIM card, by pushing down on the top of the SIM card and sliding it out from under the metal band.
Remove all four screws from the back of the phone by using a small Phillips head screwdriver and turning it counterclockwise.
The screws are 0.5 centimeters.
Use a wedge, or flat edged tool to separate the phone. Make sure to circle around the entire phone, especially the corners to pull it apart. This can be difficult. This may take several tries, so make sure to be persistent.
Separate and remove the two hard covers and the keypad.
Then remove the motherboard from the hard back of the phone.
Once the phone is completely dissembled, you can replace the screen if it is cracked. You can also replace the keypad if the buttons do not work or if there are other issues with the keypad. Another common desire people have is to unlock the phone. In order to do this, you must replace the SIM card, which is explained in the steps above.
To reassemble your device, follow these instructions in reverse order.
Net10 Phone Codes Crack Download
To reassemble your device, follow these instructions in reverse order.
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.
